The open database

Maritime Knowledge Library

Author

Organization

Publication year

Technical topic

11 entries
Marine Engineering

Engine Room Watchkeeping: The Daily Rhythm

What a well-run engine room watch actually looks like, hour by hour.

10 Nov 2026 Ship's Almanac 2026 engineering
Marine Engineering

Bollard Pull Test Procedure Explained

What a bollard pull test proves, the site and weather limits that make it valid, how the load cell works, and what goes on the certificate — following the Wärtsilä procedure.

8 Nov 2026 Wärtsilä 2002 towing
Marine Engineering

Oily Water Separators: Gravity Plates and Centrifuges for Bilge Water

How ships get bilge water below the 15 ppm MARPOL Annex I limit — oleophilic plates, coalescence and centrifugal force, and where each method earns its keep.

8 Nov 2026 Ship's Almanac 2026 marine engineering
Marine Engineering

Diving Systems — Life Support, Recovery & Safety Assurance

Understand surface and saturation diving systems, independent life support, launch and recovery, hyperbaric evacuation and the evidence behind class approval.

8 Nov 2026 DNV AS; Maritime Knowledge 2024 diving systems
Marine Engineering

ROV Lifting — Load Testing, Inspection & Release Evidence

Trace ROV, TMS and tooling load paths; distinguish inspection, examination and testing; verify competence, configuration and records before release.

8 Nov 2026 IMCA; Maritime Knowledge 2016 ROV
Marine Engineering

Centrifugal Separators: Purifiers and Clarifiers in the Engine Room

How the disc-stack centrifuge keeps fuel and lubricating oil fit to burn — gravity discs, water washing, sludge cycles and the purifier-versus-clarifier decision.

8 Nov 2026 Ship's Almanac 2026 marine engineering
Marine Engineering

Water-Mist Fire Systems — Reading Type Approval Certificates

Read historical XFlow approvals without confusing nozzle approval, local application, space protection, bilge coverage or installed-system acceptance.

8 Nov 2026 Maritime Knowledge 2026 water mist
Marine Engineering

Marine Hydraulic Cylinder Maintenance: Isolation, Seals and Inspection

Explore a shipboard hydraulic-cylinder maintenance photo sequence: load support, stored energy, rods, glands, seals, contamination control and return to service.

8 Nov 2026 hydraulic cylinders
Marine Engineering

Maritime Automation: Machinery Monitoring and Ship Simulation

Engine monitoring, sensor–model residuals, redundancy and passenger-flow simulation: an original introduction informed by Aranda, Armada and de la Cruz’s 2004 research collection.

7 Nov 2026 CSIC / UNED / Universidad Complutense de Madrid (source editors) 2004 Maritime automation
Marine Engineering

How a Bow Thruster Works

A practical lesson on tunnel-thruster reaction, drive components, blade pitch, installation, safe operation, maintenance and low-speed limitations.

1 Nov 2026 Ship's Almanac 2026 bow thruster
Marine Engineering

Bunkering: A Safe Transfer Procedure

From pre-transfer conference to final draught survey — the discipline that prevents oil pollution.

20 Sept 2026 Ship's Almanac 2026 bunkering