The open database
Maritime Knowledge Library
Author
Organization
Publication year
Technical topic
Cruise-Ship Operations: Departments, Turnaround & Port Calls
How deck, engineering and hotel departments coordinate passenger services, port calls, technical readiness and safety aboard a cruise ship.
Solong & Stena Immaculate: Collision Case Study
What the MAIB interim report establishes about the fatal North Sea collision, and the watchkeeping and emergency-response questions it raises.
Duties of the Officer of the Watch
The standing responsibilities of the OOW: safe navigation, collision avoidance, and the condition of the vessel at all times.
Fundamentals of the Rules of the Road
How the COLREGs are structured and why every officer must internalize Rules 5–8 before anything else.
Master's P&I Handbook: First Actions in Claims and Emergencies
Master's first actions for crew claims, stowaways, personal injury, cargo claims, salvage/SCOPIC, property damage, collision and oil pollution, with a self-test.
Cargo Claims: Delivering What You Received
The Master must deliver cargo in the same good order it was received. Why defects found during loading must go on the Bill of Lading — and what happens when they do not.
Marine Insurance: Hull, Cargo and P&I Cover
How marine insurance protects ships, cargo and maritime operations — hull, cargo and P&I cover, general average, Institute Clauses and the claims process.
Navigation, Cargo & Mooring Risk: Group Discussion Guide
Four incident-debrief questions on navigation, cargo work and mooring hazards, controls and the assessor's role, with a self-test.
Ship Lock Entry Technique: Speed, Bank Effect and Thruster Control
How to enter wide, narrow and river locks: minimum speed, transverse thrust, Bernoulli bank suction, springs and bow-thruster control, with a self-test.
Dynamic Positioning: Systems, Operations & DPO Training
An introduction to vessel station-keeping, the four core parts of a DP system, the DPO certification pathway, and opportunities to improve training.
Fire-Hose Couplings: Types, Compatibility and Inspection
How to inspect fire-hose couplings on board: seals, lugs, corrosion, compatibility and when to remove a coupling from service.
Flag State Guide: Which Maritime Rules Each Flag Enforces
What a flag State does, which IMO and ILO conventions twelve major flags have in force — Panama, Liberia, Marshall Islands, Hong Kong, Singapore, Malta and more — where they differ, and a self-test.
Offshore Anchoring: Mooring Systems, Soil and Holding Capacity
How offshore anchors hold: mooring load paths, seabed conditions, anchor types, installation evidence and anchor-handling safety.
Turnbuckles and Rigging Inspection: Components, Markings and Safe Use
Identify an open-body jaw–jaw turnbuckle, understand WLL and traceability, and inspect threads, pins, locking and rope connections using onboard photographs.
Engine Room Watchkeeping: The Daily Rhythm
What a well-run engine room watch actually looks like, hour by hour.
Master's Discretion: SOLAS Chapter V, Regulation 34-1
SOLAS Chapter V, Regulation 34-1 guarantees that no owner, charterer or operator can prevent the Master from taking the decisions needed for safety of life at sea and protection of the marine environment.
SOLAS Chapter XV and the IP Code: Carrying Industrial Personnel
Since 1 July 2024, SOLAS Chapter XV and the IP Code set mandatory safety rules for ships carrying more than 12 industrial personnel. This guide covers who they apply to, how the Code is structured, and the timeline.
Maritime Autonomy and Remote Operations: The UK 2021 Consultation
Remote control, autonomous decision-making, shore operations centres and accountable command—an original guide to the UK Department for Transport’s 2021 proposals.
Bridge Layout and Equipment on a Cargo Ship
A walk round a cargo ship's bridge — the layout from conning position to bridge wings, and what each instrument does and how far to trust it: gyro and magnetic compasses, GNSS, radar, ECDIS, AIS, echo sounder, speed log and the weather instruments, with SOLAS carriage and watch checks.
Bollard Pull Test Procedure Explained
What a bollard pull test proves, the site and weather limits that make it valid, how the load cell works, and what goes on the certificate — following the Wärtsilä procedure.
Marine Hydraulic Cylinder Maintenance: Isolation, Seals and Inspection
Explore a shipboard hydraulic-cylinder maintenance photo sequence: load support, stored energy, rods, glands, seals, contamination control and return to service.
Wire Rope Resin Socketing: Compatibility, Competence and Safe Use
Understand resin socket load paths, rope–socket compatibility, competent workmanship, cure verification and traceable release records. A safety lesson, not a socketing recipe.
Anchor Handling, Equipment & Conversions — Examination Part 3
Anchor anatomy, towing load paths, rig-move readiness and equipment checks, with corrected unit conversions and twelve revision questions.
Wire-Rope Resin Socketing: Step-by-Step Procedure Training
Follow ten controlled stages from job approval and assembly identification to preparation, filling, cure, acceptance and documented release. Manufacturer-specific instructions govern every practical operation.
Water-Mist Fire Systems — Reading Type Approval Certificates
Read historical XFlow approvals without confusing nozzle approval, local application, space protection, bilge coverage or installed-system acceptance.
GMDSS Bridge Radios: VHF, MF/HF and SART
The radio equipment on a cargo ship's bridge and what each set is for — GMDSS sea areas, VHF and MF/HF distress channels, DSC, radar and AIS SARTs, carriage rules and the daily checks the watch officer owns.
Maritime Treaty Instruments — From Convention to Shipboard Compliance
Understand conventions, protocols, mandatory codes and guidance; separate adoption from entry into force and verify flag, ship and amendment applicability.
Centrifugal Separators: Purifiers and Clarifiers in the Engine Room
How the disc-stack centrifuge keeps fuel and lubricating oil fit to burn — gravity discs, water washing, sludge cycles and the purifier-versus-clarifier decision.
Navigation, Stability & Safety — Examination Part 2
Worked stability and navigation calculations, recovery planning and H₂S precautions, with corrected study-sheet answers and official sources.
Offshore Wind Installation Vessels: From Port Loading to Jack-Up Operations
Follow turbine towers, nacelles and blades from the loading port to offshore installation, and understand jack-up legs, preload, air gap and safe lifting.
COLREG Exam Preparation: Lights, Shapes, Sound Signals and Region A Buoyage
An original, corrected study lesson covering vessel recognition, navigation-light arcs, fog signals, encounter rules and IALA Region A marks, with official references and twelve questions.
EPIRB: How a Distress Beacon Gets You Found
How a 406 MHz EPIRB turns a sinking ship into a position on a rescue coordinator's screen — the six-step alert chain, why 121.5 MHz beacons were dropped, GNSS and MEOSAR, SOLAS carriage, testing, registration and false alerts.
ECDIS Cross-Track Limits — XTD, CPA & Checked Water
Choose leg-specific cross-track limits, distinguish CPA from off-track alarms and verify route-check coverage before relying on a wider navigation corridor.
Navigation Formulas Every Deck Officer Should Know
Compass errors made simple: true, magnetic and compass north, the TVMDC conversion both ways, compass error from a bearing, and relative-to-true bearing conversions — with worked examples.
ROV Lifting — Load Testing, Inspection & Release Evidence
Trace ROV, TMS and tooling load paths; distinguish inspection, examination and testing; verify competence, configuration and records before release.
Wire-Rope Socket Inspection: Damage, Isolation and Removal from Service
Inspect the socket, pin, rope entry and records; recognise warning signs and distinguish immediate isolation from permanent discard using product-specific criteria.
Ship Management Company: Shore Teams and Onboard Organization
Understand how owners, shore departments and shipboard teams work together, including the DPA, CSO and the Master’s overriding authority.
Diving Systems — Life Support, Recovery & Safety Assurance
Understand surface and saturation diving systems, independent life support, launch and recovery, hyperbaric evacuation and the evidence behind class approval.
Oily Water Separators: Gravity Plates and Centrifuges for Bilge Water
How ships get bilge water below the 15 ppm MARPOL Annex I limit — oleophilic plates, coalescence and centrifugal force, and where each method earns its keep.
Life Cycle of Oil and Gas Fields: From Gaining Access to Decommissioning
The six stages of an oil and gas field — access, exploration, appraisal, development, production and decommissioning — and the vessels that serve each one.
General Average: York-Antwerp Rules, Declaration and Security
When a sacrifice or expense made to save ship and cargo is shared by everyone it saved — the five tests of a general average act, which York-Antwerp Rules apply, declaring general average, average bonds and guarantees, deck cargo and the Master's steps at a port of refuge.
Using the 2102-D Star Finder: Star Identification & Sight Planning
Set up the 2102-D with latitude and LHA Aries, identify candidate stars and plan twilight sights—without confusing estimates with a navigational fix.
Ship Stability — GZ Curves, Weather Criteria & Lightweight Data
A sourced guide to DNV’s July 2024 stability chapter: initial GM versus full GZ assessment, downflooding, weather, damage stability and approved lightweight data.
VERIPOS GNSS Positioning for DP: Corrections, Errors and Reference Quality
An original GNSS lesson based on VERIPOS’s 2020 book: satellite geometry, errors, correction methods and the checks that make a position reference usable for DP.
Choosing and Using Anchor Classes in Real Conditions
Apply the historical Classes A–G to practical selection questions: seabed, load direction, setting evidence, handling and changing conditions.
MASS Projects in Norway: Remote Operations and Safe Fallbacks
A source-based introduction to Norwegian autonomous cargo, passenger and subsea-vessel projects, remote operations centres and mission-specific safety assurance.
Maritime Automation: Machinery Monitoring and Ship Simulation
Engine monitoring, sensor–model residuals, redundancy and passenger-flow simulation: an original introduction informed by Aranda, Armada and de la Cruz’s 2004 research collection.
Digital Twins for Energy and Offshore Operations
How asset-linked digital models can support maintenance, planning and offshore collaboration—and why data quality, validation and safe operating boundaries matter.
Autonomous Ships and Safety at Sea: People, Cybersecurity and Assurance
A critical guide to autonomous-ship safety: human oversight, cyber resilience, system assurance, insurance questions and the limits of the One Sea white paper.
Gas Bunker Vessels and Shipping's Fuel Transition
Why LNG and ammonia bunker vessels are becoming critical infrastructure: DNV's demand estimates, conversions, bunkering hazards and safe ship-to-ship practice.
Preparing for Sea: The Master's Pre-Departure Business
Everything the Master must have in order before letting go — the sailing checklist, SOLAS steering gear tests and drills, load line and dock water allowance, passenger counting and musters, keeping order on board, customs clearance and FAL forms, light dues, hazmat notification and bad-weather recommendations.
How a Bow Thruster Works
A practical lesson on tunnel-thruster reaction, drive components, blade pitch, installation, safe operation, maintenance and low-speed limitations.
COLREG Explained: The 5 Parts and 38 Rules
A watchkeeper's map of the Collision Regulations: Parts A to E, the rule numbers inside each, the four annexes, and which part to open on watch.
Port State Control: How Coastal States Enforce Standards
How Port State Control officers board foreign ships, verify certificates and crew training, record deficiencies, and detain vessels that fall below international standards.
The STCW Convention: Standards of Training, Certification and Watchkeeping
Why every seafarer's certificate traces back to one IMO convention — and how Port State Control enforces it in ports around the world.
S.H. Griffin #4: The Well That Started the Shale Revolution
How a stubborn Barnett Shale well drilled near Dish, Texas in 1998 proved slick-water fracturing and unlocked the U.S. shale revolution.
Bills of Lading: Receipt, Contract and Document of Title
How the Mate's Receipt becomes the Bill of Lading, why "Freight Paid" and "Clean on board" endorsements carry real risk, and how the Master delivers cargo only to its rightful owner.
Management System Certification: From Request to Recertification
How a management system certificate is earned and kept: the five-step process, the two phases of the certification audit, surveillance visits, and the three-year recertification cycle.
Ship's Certificates: The Documents a Vessel Must Carry
The statutory, class and trading certificates a ship must keep on board to trade and obtain Customs clearance — plus the MARPOL pollution-prevention certificates and when each applies.
Jurisdiction of Coastal States over Foreign Ships and Crew
A foreign ship lives under two legal systems at once: the flag state and the coastal state. Learn where coastal state power begins and ends — from internal waters to the high seas — and how to act when local authorities come on board.
Introduction to Tides
A practical seamanship lesson on tidal forces, spring and neap tides, tidal datums, streams, the Rule of Twelfths, and safe use of tide predictions.
Marine Boiler Maintenance: Cleaning, Blowdown, Gauge Glass and Burner Care
A video lesson with study notes on water washing, tube cleaning, soot blowing, boiler and scum blowdown, gauge glass blowdown, burner maintenance and furnace defects — with two step-by-step simulators and a 36-question self-test.
DNV-RP-E306: Dynamic Positioning Vessel Design Philosophy Guidelines
DNV recommended practice, developed with the Marine Technology Society DP Technical Committee, on designing DP vessels for their industrial mission rather than for class notation alone.
IMO MSC.1/Circ.1580: Guidelines for Vessels and Units with Dynamic Positioning (DP) Systems
The current IMO guidelines for DP vessels and units, approved by MSC 98 on 16 June 2017, superseding MSC/Circ.645 and introducing the DP Verification Acceptance Document.
DNV DP Capability Level 1 Application: Online Station-Keeping Calculation
DNV's online application for DP Capability Level 1 to DNV-ST-0111 — a prescriptive, comparable calculation of station-keeping capability for ship-shaped single-hull vessels.
Bunkering: A Safe Transfer Procedure
From pre-transfer conference to final draught survey — the discipline that prevents oil pollution.
Glossary: Standard Bridge Orders
The wheel and engine orders every deck officer must give — and every helmsman must repeat back.
SOLAS Fire Safety: Structure of a Shipboard Response
How SOLAS Chapter II-2 shapes fire prevention, detection, and response on board — and what the muster list demands.
Life-Saving Appliances: Weekly and Monthly Checks
A practical inspection rhythm for lifeboats, liferafts, and pyrotechnics that keeps the vessel survey-ready.
Cargo Stowage: Stability, Segregation, Securing
The three questions every loading plan must answer before the first unit comes alongside.
Passage Planning: The Four Stages
Appraisal, Planning, Execution, and Monitoring — the IMO framework for a safe berth-to-berth passage plan.
Glossary: Terms of the Ship
From abaft to yaw — the essential vocabulary of deck and engine, defined the way it is used at sea.