The open database
Maritime Knowledge Library
Author
Organization
Publication year
Technical topic
Cruise-Ship Operations: Departments, Turnaround & Port Calls
How deck, engineering and hotel departments coordinate passenger services, port calls, technical readiness and safety aboard a cruise ship.
Duties of the Officer of the Watch
The standing responsibilities of the OOW: safe navigation, collision avoidance, and the condition of the vessel at all times.
Ship Lock Entry Technique: Speed, Bank Effect and Thruster Control
How to enter wide, narrow and river locks: minimum speed, transverse thrust, Bernoulli bank suction, springs and bow-thruster control, with a self-test.
Turnbuckles and Rigging Inspection: Components, Markings and Safe Use
Identify an open-body jaw–jaw turnbuckle, understand WLL and traceability, and inspect threads, pins, locking and rope connections using onboard photographs.
Maritime Autonomy and Remote Operations: The UK 2021 Consultation
Remote control, autonomous decision-making, shore operations centres and accountable command—an original guide to the UK Department for Transport’s 2021 proposals.
Bridge Layout and Equipment on a Cargo Ship
A walk round a cargo ship's bridge — the layout from conning position to bridge wings, and what each instrument does and how far to trust it: gyro and magnetic compasses, GNSS, radar, ECDIS, AIS, echo sounder, speed log and the weather instruments, with SOLAS carriage and watch checks.
Ship Stability — GZ Curves, Weather Criteria & Lightweight Data
A sourced guide to DNV’s July 2024 stability chapter: initial GM versus full GZ assessment, downflooding, weather, damage stability and approved lightweight data.
Wire-Rope Socket Inspection: Damage, Isolation and Removal from Service
Inspect the socket, pin, rope entry and records; recognise warning signs and distinguish immediate isolation from permanent discard using product-specific criteria.
Navigation Formulas Every Deck Officer Should Know
Compass errors made simple: true, magnetic and compass north, the TVMDC conversion both ways, compass error from a bearing, and relative-to-true bearing conversions — with worked examples.
ECDIS Cross-Track Limits — XTD, CPA & Checked Water
Choose leg-specific cross-track limits, distinguish CPA from off-track alarms and verify route-check coverage before relying on a wider navigation corridor.
Navigation, Stability & Safety — Examination Part 2
Worked stability and navigation calculations, recovery planning and H₂S precautions, with corrected study-sheet answers and official sources.
Wire Rope Resin Socketing: Compatibility, Competence and Safe Use
Understand resin socket load paths, rope–socket compatibility, competent workmanship, cure verification and traceable release records. A safety lesson, not a socketing recipe.
Wire-Rope Resin Socketing: Step-by-Step Procedure Training
Follow ten controlled stages from job approval and assembly identification to preparation, filling, cure, acceptance and documented release. Manufacturer-specific instructions govern every practical operation.
Using the 2102-D Star Finder: Star Identification & Sight Planning
Set up the 2102-D with latitude and LHA Aries, identify candidate stars and plan twilight sights—without confusing estimates with a navigational fix.
MASS Projects in Norway: Remote Operations and Safe Fallbacks
A source-based introduction to Norwegian autonomous cargo, passenger and subsea-vessel projects, remote operations centres and mission-specific safety assurance.
Autonomous Ships and Safety at Sea: People, Cybersecurity and Assurance
A critical guide to autonomous-ship safety: human oversight, cyber resilience, system assurance, insurance questions and the limits of the One Sea white paper.
Introduction to Tides
A practical seamanship lesson on tidal forces, spring and neap tides, tidal datums, streams, the Rule of Twelfths, and safe use of tide predictions.
Passage Planning: The Four Stages
Appraisal, Planning, Execution, and Monitoring — the IMO framework for a safe berth-to-berth passage plan.